Moisture problems are no laughing matter: they damage your home and are bad for your health. Tackling them in time is the message! But how exactly do you prevent damp problems? We give you 3 good tips and start with leak detection.
1. Track leaks in time
Water leak detection, not everyone is into it. And yet a preventive approach is more than desirable. Be sure to check for rust in your water pipes. This sneaky culprit causes the longer, the bigger leaks. Consequence: your bathroom will fall victim to unsightly moisture stains or mould after a while.
And what if it is too late?
You certainly don't need to start DIY. Nu Flow uses advanced techniques for leak detection. It does not even require any breaking: you will hardly be inconvenienced!
2. Ventilate your home
Your home needs adequate ventilation. Reason: moist air must be exhausted. Otherwise, sooner or later, you will end up with moisture problems. How exactly do you ventilate your home? That depends on the age and type of home. If it concerns newly built houses or large-scale renovations, a ventilation system is even compulsory. You do not have such a system? Then you can leave the windows ajar for a while.
And what if it is too late?
Then it is important to still take action quickly. Depending on the type of moisture problem, Nu Flow will choose an appropriate control method. Solve your moisture problems today!
3. Avoid cold bridges
A thermal bridge is the result of poor insulation. A kind of figurative bridge between the climate in your home and the outside air, so to speak. Not only does such a bridge let heat out of your home, it also causes condensation. And a warm indoor temperature + a lower outdoor temperature = mould.
And what if it is too late?
Mildew or other moisture problems? Nu Flow knows how to tackle them: almost any technique is possible without digging or breaking!
Contact us for leak detection, additional information and/or questions: 056 23 00 30 or info@nuflow.be. Or follow the latest updates via Facebook and/or LinkedIn
